Just thinking out loud here — maybe the inverter and battery system just can’t react fast enough when the microwave kicks in with that big power spike...

@eg4eric I apologize. I just checked and the firmware was updated on 05-10 to EAAB-201E

@eg4eric Thank you very much for the information. Here is what I am hoping to get out of my system: 1) Charging battery with solar during the day ...

The most recent firmware is from 2021. It appears that your inverter didn't install the complete update. I recommend ensuring the update finishes and ...

@dan_in_ak I am having the same time problem with 12000xp not properly charging my ifla lead acid forklift batteries. It seems eg4/signature does not ...

The latest firmware for the 12kPv would be FAAB-2021. It looks like your inverter did not completely finish updating.To ensure the screen displays the...

@adwilson254Most of the time, when people have flickering lights, it's caused by wiring issues but not always.Where do you have your PV grounded?

The latest firmware version is 191011. If you see this listed under the Firmware Version tab, it means your inverter is up to date.

I am currently interested in buying EG4 LifePower4 or EG4-LL batteries and I had the same question. It would be interesting to know if EG4 is alread...

@eg4eric Thanks--I didn't see anything about automatically shutting off in my documentation. Looks like the electric on demand heater isn't a viable o...

@dannybeardsley Thanks for the feedback. Heat pump is not an option--can't justify the expense. We have an off-grid cabin, with a 100 gallon tank and ...

@eg4eric, the detail of his system's solarPV input being curtailed down to only support the load is likely an issue since there's no way the MPPTs ca...

I use a small 2000W 120VAC portable generator for exactly the scenario you have in mind - I use it to charge the battery bank and nothing else. In my ...