I would recommend the installation of an external bus for future expansion. However, this approach would also work.

Enabling Battery Backup mode configures the inverter to prioritize output as PV > AC > Battery. This setting ensures that battery power is only ...

The generator input for the 18kPV requires 120/240VAC. For more details on the generator requirements, please refer to page 22 of the 18kPV manual.

You are correct... My apologies, I had it in my head you needed a NO AND NC, not a 2 pole NO. Give me just a sec.

The Lifepower4 V2 battery is compatible with the 6500EX inverter. However, if the battery does not come with firmware version Z02T04, a firmware updat...

I agree! As soon as I have some additional information about this particular issue, status update, progress reports, etc.. I will respond here again.

@jarrett , yes we had emailed back and forth several times.... This new forum will be a decent way to track open bugs, and let people know when patch ...

Thank you for the input! I reported this bug a while back, probably spoke with you about it. I am waiting for a resolution on this at the moment, but ...

Thanks for the input! I will speak with the Doc team about this.

@the-goldendoodle-plantaion To run PV and AC power loads simultaneously, you would need to use the GEN port for AC coupling or generator power. Howev...

When my well pump was doing that, I powered down my entire house and I went through all of my terminals in the breaker panel and re-tightened them. I...

Jarrett, Thank you for the information but, I guess I am a little confused. If I need an NO contactor on the 6000xp side and a NO contactor on the ...

@joel-brodeur I did a little research, (and sorry for taking the weekend on this), and I found an RSD that has a NO and a NC. If I read this c...

The inverter will do exactly what you want it to do you’re just missing a setting or two. Look at your “charge first “ settings and your charge and di...