I have 2 strings of 6 (535W) panels each. Each string provides about 3kW at about 240-250V and are connected to PV1 and PV2. The panels, which are a...

@jlankfordI don't see where they actually acknowledged the flickering in that post.

P.S. As the flickering is worse sometimes, and very minimal at others, I will see if I can isolate the cause to some device...such as my fridge, mini...

First, thank you for the reply.Many of my LED bulbs flicker constantly when running from the battery or solar. I have seen other posts that mention s...

I am beginning to have my doubts about EG4 support. I had previously tried to get four more center-clamps for my Brightmounts and was told that they ...

According to EG4, once you go to 1E1E, you cannot go back. This is due to an updated memory mapping.

Twice my dongle has failed to connect and twice I thought it was the dongle. Turns out both times it was a modem/router issue. Once it was my DSL ...

One more...for now: 9. On the phone app, there is the ability to start a Quick Charge, however there is no way to stop it as the Stop button goes aw...

Good luck. I asked for 4 of those about 2 months ago and they said they would send them. I am still waiting.

@jlankford That gives me some hope that it is just a firmware problem that can be fixed in another update. I guess you should not upgrade to 1E1E unt...

My 18Kpv testing: The solar input was roughly 3.2-3.3kw all during testing. No grid power was used. I used a thermal camera to capture some temps....

I can't do any testing for you now because it is after 3pm which is when peak rates are in effect. I can try tomorrow if I remember. I will try cha...

Correct, the fans do not run at all when under 6kW. Someone else with a 3000EHV will have to provide their experience.