@jared Can you link me to either a video or documentation on how to upgrade the firmware on the batteries?

Thanks for the reply, Frugal. This is what I meant with option 2 and the extra hardware. I just couldn’t think of Dinrail at the time I was writing ...

Couldn't you mount some din rail on the wall to gain more clearance? Toggle bolted inverter doesn't sound secure to me for long term purposes.

@teeumup I might add - the inverter will report the correct charge capacity (based on number of packs) as amperage - even without showing the details ...

@teeumup Yes - Jared solved this. The Wifi dongle vintage is the issue. Older ones cannot read battery information. Maybe the firmware discussion abov...

@dlwittsr did you ever figure this out. I have 3 powerpros and a 18kv and I have never had any detailed battery info. I just added the 3rd battery an...

@eric I noticed on our recent bill there were a few kWh of grid consumption power and I believe it's from little blips of grid power usage I see on th...

It now works. I am impressed that it was fixed so quickly. {emojis}:grin: Of course, it should not have happened in the first place.

Eric, Thank you for your help! My problem was solved after updating my V1 with V2 firmware. Turns out my "refurbished" EG4 3000 ehv-48v V1 take...

Looks like this also happened last year same day.

Seems that this happened last year same time.

can't use the site until this is fixed

Me too