I think it all depends on the power consumption of your house. I have the 6000xp set up for our off-grid cabin with 5, 48-volt, 100h batteries. It eas...

@jlankford Yes, sorted the generator issues. I gave up on trying to sort out the battery balancing issues here, since there was little response from E...

@joel-brodeur - Interesting. You'd think there'd be blocking diodes or MOSFETs protecting the inputs to stop any current backflow. Both would cause sm...

@hanzi I had similar experience while commissioning a 6000XP, as soon I got an Earth Ground and a NG ground at the panel (not the programmable NG bond...

@joel-brodeur - I have been testing the inputs with correct polarity (red + / black -), and reversing the polarity does result in a negative DC voltag...

PARDON me, I misspoke... Parallel it is. they do they are they do I see that now. I do not export anything to the grid. I just wa...

I had the same problems and more when adding V2's to my V1's. V2's will have to be on first in the rack to communicate properly. You will also most li...

I should clarify, What is a 2 x Rotary? Is that an inverter type of compressor or not?

In case anyone has the same problem I just realized I accidentally post the results of the LCD update on my generator thread. The update fixed the scr...

Just curious, when you are testing the voltage at the PV inputs (neg lead to neg input pos lead to pos input) are you getting positive or negative DC ...

Here's a picture of my 6000XP with the mixed battery bank. I mostly did this battery bank as "mixed" because I wanted to test out a number of batteri...

@frugal-farmer There was no clock of any kind that I found in the 3000EHV-48, but it does have a power savings mode. I was not interested in this as...

The 6000XP is working perfectly for my desired setup. I had two goals in mind. 1. Battery Backup 2. Time of Use energy savings (TOU) The EG...

@eric- results of some testing I did tonight. PV Input Voltage Testing The PV input voltage refers to the DC voltage measured across the inverter's...

Just curious if the 6000XP is working for your application? I have recently set up a similar goal, of "UPS" for my server/network room. I have...