I am using the battery CAN port to communicate to the 18KPV. Should I be using the RS485 port? That seems to be what they are using here.

Thank you. I will try that out in the morning. The second and third batteries have their DIP switches set to 2 (binary 01) and 3 (binary 11) and they ...

@weertske On the inverter, the battery brand should be set to 1 for the wallmount, not 0. You have battery comm cables connecting the second and t...

Twice my dongle has failed to connect and twice I thought it was the dongle. Turns out both times it was a modem/router issue. Once it was my DSL ...

@jared I also have Z02T03. I am having an issue with CANbus. I will not hijack this thread but will watch and learn. Thanks.

@ron Yeah, it's rare our batteries get below 50% and typically don't go below 60%. I was confused about the top, thinking I should stop charging at 8...

Seems strange for a washing machine. What is the wattage at when turning it on?

Merry Christmas!

My experience is that a lower depth of discharge increases battery life ie. 30-40% SOC, but everyone has differing opinions.

@dtbaker61 that's cool that it's working well for you! I keep ours on the lithium setting because then the app shows percentages. The percentages ar...

these settings are working pretty well with 6000xp firmware v 190D0E. Most days I see a correct battery voltage cc-cv curve with end-of-charge at 56.2...

@jpangburn Thanks - that is a good plan and I will give it a try turning off one battery at a time and see if that will clear the fault. Pace bms are...

This is a pic this morning with all inputs. (No grid input)