Could you send me a DM with the dongle serial number, and I will get this reset for you.

It may be related to the temperature reported by the BMS, as charging should occur within the range of 32°F to 131°F, while discharging should occur w...

@jared I can simply switch the stickers. Thanks for confirming. I do need help with another issue though. Posted in another thread regarding batter...

I would verify that the phone is not connected to the Wi-Fi network broadcasted by the dongle but is instead connected to the home router.

I recommend setting the PV Charge Priority to 100% or your desired SOC and configuring the battery priority timing accordingly. This setup allows the ...

oh, one more thing, once I changed it back to enabled then it started charging again...

I've done two "quick charge"s, one Sunday and one today. After both quick charges, I checked the settings. Both times, the settings AC CHARGE: cha...

@jared

The CTs are mislabeled. If you'd like them oriented correctly, I can adjust the CT settings in the inverter, or you can leave them as they are current...

Many places ae getting very crowded on the 2.4GHz airspace. Literally everything uses this frequency from smart appliances to security cameras and ce...

@jlankford Thank you I do have a hard copy that came with the inverter. It is version 2.0.0. Grid peak shaving is on pg 68 but is useless however it...

@mustangzrule I can't offer any help on your questions. Do you have a copy of the manual that includes all of the user and installer settings? I've...

OK so the "quick charge" button takes a long time to kick in (15 minutes). Not so quick to respond but maybe the charging will be quick... Wish...

@jared See below