@joel-brodeur Glad I wasn't taking a drink reading the magic vulcan nerve pinch. That was funny. Appreciate the insight however.

I have had remote updates fail and I was able to just re-run the process. However, I do not run parallel 6000xp's so my experience is with just a sin...

My 2-battery drift that way as well on SOC but definitely not that dramatically. I have seen posts on other forums about "resetting" the BMS's throu...

So grid charge is completely manual function?

When connected to the grid, the loads will switch to grid power if PV power is unavailable, and the battery reaches the on-grid EOD. To enable AC char...

I will make the change and report back!

It looks like the master inverter has less PV available then the secondary inverter. I would recommend making the inverter with two arrays as the mast...

Hi Jared, Thanks. When this happens my EPS output load is usually only 300 - 400 Watts. Sometimes lower. There are no errors listed in the Event Histo...

Thanks

The first inverter powered on will take the role of "master" inverter. However, if these are paralleled on the monitoring system, I would verify the s...

I would recommend setting the discharge current to 350A with the two Wallmounts paralleled to the three 6000XPs.