@eric Thanks for the reply. I am confused by your statement "I can confirm that using batteries in series can sometimes cause issues with the inverter...

I’m not familiar with the wall mount batteries. All the settings you are talking about are programmed in my inverter. I believe most BMS’s look at vol...

@jareds I can confirm that using batteries in series can sometimes cause issues with the inverter, leading to abnormal operation.Regarding charging, o...

EG4TechSolutionsTeam: "After reviewing the first remote set, I noticed that the LCD version is still on 12/1/1. Has it been updated to 18/1/1, as th...

@caesarv Where do you have your PV grounded? Also, are you running the inverter on Lead-acid for these batteries?

Good morning! Make sure Battery Backup Mode is disabled If Battery Backup mide is already disabled, you can set a time or battery percentage on ...

@jlankfordI don't see where they actually acknowledged the flickering in that post.

@bobandroslyn I was not supporting the idea. Of course, it is not recommended to remove the feet or switch them for casters. However, I'm sure there a...

> Dose Anyone here run grid as backup? If you do can you let me know if it is working properly and how is your gird backup is wired up?I'm running...

BobAndRoslyn, Thanks for your concern and input. I must admit my first gut response was that I'm not sure adding yet another "nanny warning" is neede...

@twistedroutes and @eric, this seems like a REALLY BAD IDEA! Those batteries are 300lbs. I would expect EG4 would take a more cautious stance on use...

@eric, information sent via private message.

You are able to do AC couple, which allows the user to add PV from an existing grid tied solar system. You would need to connect the output of the exi...