@eric Well I suppose that's a useful tip in some cases. The solution was one not listed anywhere. 1. In the EG4 Monitor app, log out. 2. Connec...

Make sure that you have a specific network for 2.4GHz and don't have any special characters in the Wi-Fi password.

That should be correct for the 12kPV. You shouldn't have any issues. However, If you run into any issues with the inverter, feel free to reach out. We...

Hello @tlane17, exactly what you need help with? I’ll do my best to assist you!

@jared unfortunatley it is still defaulting back to YES for Daylight Savings. would be great if this were fixed but i give up for now. i cant risk t...

You can do either option, but have to size the wire correctly. I would keep the batteries close to the inverter./p>

@jared I understand it takes time. I just went back in tonight and daylight savings is set to YES yet again. This has been the problem since Februar...

@george redingerTo fix this, turn on "Self-Consumption Mode" or "Battery Priority" in your settings. This ensures your solar power charges the battery...

Regarding its lights, all it does is blink the WiFi symbol — nothing else. Also, pressing and holding the bottom at bottom for 10+ seconds does no...

I can connect to the WiFi of the dongle, but 10.10.10.1 does not respond in a web browser. However, I can ping 10.10.10.1 just fine, so clearly I am...

@chris07x I neglected to enable "A". I assumed it to mean "only act as a backup". I think there is mode where the inverter passes power through fro...

Thanks. All my times are the same but the desktop application is where it ask for Daylight saving time input. My work around is setting the time zone ...