@jlankford

@mustangzrule Can you still see that thread? I cannot find it regardless of how I search for it on the forum. Very weird if it's still visible to yo...

@jlankford I did not delete the thread but I did make an edit. Maybe the message ID changed when I did that.

@jared Do you mean this? I will run this for a 24 hr cycle and see if this works. Thanks.

@mustangzrule That other thread has disappeared from the site. I got a notification that you replied to my comment in there, but when I tried to lo...

Are there any communication warnings occurring? I would verify that BMS communication is properly configured or set the inverter to Lead-Acid to confi...

Could you send me a DM with the dongle serial number, and I will get this reset for you.

It may be related to the temperature reported by the BMS, as charging should occur within the range of 32°F to 131°F, while discharging should occur w...

@jared I can simply switch the stickers. Thanks for confirming. I do need help with another issue though. Posted in another thread regarding batter...

I would verify that the phone is not connected to the Wi-Fi network broadcasted by the dongle but is instead connected to the home router.

I recommend setting the PV Charge Priority to 100% or your desired SOC and configuring the battery priority timing accordingly. This setup allows the ...

oh, one more thing, once I changed it back to enabled then it started charging again...

I've done two "quick charge"s, one Sunday and one today. After both quick charges, I checked the settings. Both times, the settings AC CHARGE: cha...

@jared

The CTs are mislabeled. If you'd like them oriented correctly, I can adjust the CT settings in the inverter, or you can leave them as they are current...