@joel-brodeur I would hope that's not the case. Seems like the software engineers made a mistake if it is. Sounds like this would need a test with...

@jared thank you so much for reply! So, to recap: the wire #23 (+12 VDC) goes to NO1 the wire #194 (Transfer) goes to COM1 the wire #0 (DC Commo...

@jlankford @jared Additional thinking: If the above is true, then I think this would imply that the gen is getting a shutdown signal prior t...

The Dry1 dry contact ports are currently the only option for wiring a 2-wire stop/start with the GridBOSS. Dry2 is unused at the moment and reserved f...

I wonder if the problem isn't the switching speed but the range in which the switching occurs? Assumptions based on mentoring center (and a healthy ...

@ron According to this document - G4-254 - it looks like all they say is "Total harmonic distortion (THD) from no load to full load with a linear load...

For reference, here's the generac wiring diagram:

Only thing I could find quickly online for 12RESVL High Quality Power. Kohler generators provide advanced voltage and frequency regulation along...

Thanks Jared, This is useful From what I can tell, this api supports http get and post requests to /p> And the requests are authenticated (presu...

It really depends on the generator's THD rating. It might be beneficial to enable GEN Boost and operate the generator at around 50-70% capacity to ens...

@jlankford Thank you for the clarification. That makes sense. JB

I see the inverter limits the wattage to 90% of what you enter, but I'm not sure how that all works with 2 inverters. The 12RESVL Rated kW LP 12 kW ...

@joel-brodeur To be clear, I'm not using a gen on the grid input of my 18K. I have a regular grid input there. My gen runs through a chargeverte...

@jlankford I am connected at the Gen inputs. My reasoning is(was): If at some point EG4 comes out with some additional features such as - Run Se...