@weertske Would you be able to provide a screen shot of what you are seeing with the device monitor software on you PC and Phone? If you mean the EG...

Bad wording on my part. The DIPs are set (011111, 101111, 001111). For now lets just ignore the 2nd and 3rd battery (I'll turn them off) and just focu...

New to EG4 - full DIY install completed a couple weeks ago. 6000xp- (2) 48v Lifepower 4 100wh batteries along with 3950w of solar panels. Initial ...

@caesarv @jared Thank you again Caeser. This was the most helpful note of all. My understanding is that the 12kPV should perform the same as the 18k...

@jared Can I DM you my station ID ? my update was problematic during install .

BTW, I don't have the wallmount batteries. I have an 18Kpv and six LL-S rack batteries. I've read here that both the LL-S and the wallmount should be ...

@weertske The CAN port is what I'm using. The RS485 connection didn't work for me. Maybe post some photos of each battery in the morning, cable conn...

I am using the battery CAN port to communicate to the 18KPV. Should I be using the RS485 port? That seems to be what they are using here.

Thank you. I will try that out in the morning. The second and third batteries have their DIP switches set to 2 (binary 01) and 3 (binary 11) and they ...

@weertske On the inverter, the battery brand should be set to 1 for the wallmount, not 0. You have battery comm cables connecting the second and t...

Twice my dongle has failed to connect and twice I thought it was the dongle. Turns out both times it was a modem/router issue. Once it was my DSL ...

@jared I also have Z02T03. I am having an issue with CANbus. I will not hijack this thread but will watch and learn. Thanks.

@ron Yeah, it's rare our batteries get below 50% and typically don't go below 60%. I was confused about the top, thinking I should stop charging at 8...