Eric, displays are looking better, I still do not see self-consumption mode. I must have a setting that is contradicting something. Here is my charge/...

Thanks Eric, I see both displays the same now. I do not have the 'action' the same as your image - does that matter? Where would I change that if it d...

Make sure you have them in parallel, this will allow to show both as one. Also, make sure that the GridBoss setting is enabled through the FlexBoss21 ...

Could you please share screenshots of your settings, or provide your station name or serial number? I can review your setup and help identify why this...

@nwazog For example, we bought from Current Connected and the installer code was Current Connected.

Solved. 20 IQ8A inverters and a couple of combiner boxes for cheap on eBay in a couple of days. Couple hours of work and a little 10 AWG and I'm rerou...

Actually, what I need to know is why you give the 'tariff of 20%' as an excuse to justify price increases that are ALWAYS more than 20% (in one case y...

You need to calculate your AC power needs. If your water heat is on AC power and your AirCon is on AC power, that is a pretty sizable load. IF your ...

My 18kPV inverter is too noisy to install indoors. I am not familiar with the noise level of a 6k unit, but for mine I am REALLY glad I have it out ...

I wired my 18kPV to my Honeywell generator. I had to buy a Generac two-wire start modification kit from Generac/honeywell and then run two wires to t...

My system is slightly different (18kPV inverter), but I have the same wall mount batteries. I chose to install them on the wall close to the concrete...