You can use BMS TOOLS and BMS TEST to look at the battery details and information.

Sorry I couldn't get back to you on Friday. Were you able to switch it back?

The GridBoss can support down to 30A breakers. However, I will look into this and see if you can do a 20A breaker and if so, where you could get it.

I know it's working fine now, but what batteries are you using?Also, if you have this issue again feel free to reach out to me and I will look into it...

This only happens when you use Start Quick Charge?

@joel-brodeur Thanks!!

Any luck @diyrich. I too am looking for one.

turns out this was the inverter relay in a loop, if you hear it once it's not loud but every 30 seconds, it woke me up from a dead sleep, I'm not sure...

Well I now have another "issue" Dust, Dirt & Humidity. Arrrrrgggggggg Posted in the general inverters forum and nobody wanted to go down tha...

@ac130buff Yes, the SW switch is for an external RSD button. If you don't have Tigo, you can ignore the rest of the diagram.

@joel-brodeur This picture is from the manual and for a TIGO external transmitter. Are you saying hooking up to the 2 SW location with the switch wil...

@dannybeardsley I should have been more clear. On my system the with the indoor wall mount batteries, it trips the breakers on the batteries breakers...