Awesome. I will try doing this when I can be at the unit for an extended period of time and keep an eye on things. Thank you!

Hello brandon314159 I had the exact same problem ==>/p> Check out the link above and you will find the advice @eric gave me. I am currently co...

@eric Hi Eric- any word on the firmware update?

Make you turn off the breaker on the battery Switch all DIP switches down Restart the BMS with the power button (Not breaker) Hold the return butto...

@eric Yes. I want to prepare it to interface with my new 6kXP.

Can you share some numbers or examples of what you mean?

That could be the issue as well. This has been reported, and a fix is currently in progress.Let me know if you are still having issues with the time.

Are you trying to set the protocol on the battery?

@dericwright Well, I tried, sorry sir, maybe one of the EG4 folks might chime in.

While following the instructions, holding the return button does nothing.

So I purchased a Eaton BRN115A1CS breaker which supports AFCI and GFCI functions. Not quite what you are using but should be representative of what yo...

@dericwright I am assuming you did but I have to ask. By chance did you make sure to: 1 - Turn off battery breaker before trying to set protocol 2...

@joel-brodeur Tried both, neither do anything.

To enter service mode press and hold the return key for 5 seconds not the enter key.