@mylesj Sounds good. If you don't own a meter yourself, you should invest in an inexpensive one that will measure AC and DC volts, and resistance (...

What does the data history show as the load output when it happened?

@mylesj Let us know here what you finally resolve as the charging problem. Have you measured the grid input at the inverter with a meter?

@mylesj FYI, be aware that your SOC is not going to be accurate now until you get a full 100% charge on these batteries. Your SOC is currently abou...

@mylesj I think this is a good solution: It comes with a 240VAC power cord that should plug directly into a 240VAC generator. It will also run...

@joel-brodeur Will the 6000 boot up and run on just battery power? I assume it will, just like the 18K... I scanned through the thread but don't ...

@mylesj The flickering may be because your batteries are very low now. 45.9V in that video is about 5%. See the voltage chart I posted in a differe...

@mylesj One more thing... your batteries are NOT at 55% SOC or anywhere close to it. They are near dead. 47.6V is less than 10% SOC. This is related...

@joel-brodeur I looked at the manual... it appears that function is just incorporated into the single "AC Charge Based On" setting for the 6000. ...

@joel-brodeur On the 18Kpv, there is a setting "AC Charge Enable" which I do not see in the above screen shots. Is that not a setting applicable to...

@pawnee Did you update the LCD version too? If not, I think that's the cause of the watts display problem.

@twistedroutes Yes, that's a good point, and it illustrates that in the end each person needs to find good voltage set point values that are releva...

@twistedroutes That looks like a significant discharge load - I estimate about 24 amps per wallmount battery from your graph. So these are not rest...

I think that's effectively what I do when I charge using the Chargeverter. It's set to charge at 56V, and I leave it running until all six batteries e...

@joel-brodeur I just started re-reading that thread from SS on recalibrating SOC. So many things wrong with these instructions. In what world is 46...