@Eric Yes, backup loads breaker is/was on. I'm not sure if you saw my most recent post. Power is being supplied to the backup loads on both grid and...

@eric Here is a pic of what my battery currently indicates for firmware/LCD version Do I need to update both the firmware and the LCD? If so, cou...

There are 2 firmware updates for the indoor WallMount batteries. RS485=Z02T04 and RS232=S02T11. You will need both RS485 and RS232 cables for these up...

I don't know much about this battery, but what do you have the charge current set to on the inverter?Do you have the inverter on lead acid mode?

Can you please provide more information about your system?How many batteries?Are you using any smart ports or AC couple?

I'm glad you aren't having anymore issues! If you encounter any other issues, feel free to reach out to me!

@fizziocrat Just want to confirm, did you have the backup loads breaker on?@eabowdenDo you have power backup enabled on the inverter settings and also...

I finally got around to installing the latest firmware (-2021) this weekend. So far I have not seen any significant LED flicker even when my mini-spl...

@jsaginaw I used an oscilloscope when 8 first started trying to solve this issue. The inverter outputs a sine wave, but I didn't study it very close t...

@CoolRunnings very neat find - I found this thread as I was wondering if anyone had added bus capacitance to the output of the 18K, but to solve a dif...

@eric Thanks, Here's a screen shot of EG4 18kpv behavior following my most recent settings (above ,Remote_Set_2025_03_21.pdf) One interesting b...

I've been following a protocol spec from Pylontech (RS485 pylon version 3.2). Is this the spec that the 6000XP implements for Lithium Type: 2 ? OR is ...