I should clarify, What is a 2 x Rotary? Is that an inverter type of compressor or not?

In case anyone has the same problem I just realized I accidentally post the results of the LCD update on my generator thread. The update fixed the scr...

Just curious, when you are testing the voltage at the PV inputs (neg lead to neg input pos lead to pos input) are you getting positive or negative DC ...

Here's a picture of my 6000XP with the mixed battery bank. I mostly did this battery bank as "mixed" because I wanted to test out a number of batteri...

@frugal-farmer There was no clock of any kind that I found in the 3000EHV-48, but it does have a power savings mode. I was not interested in this as...

The 6000XP is working perfectly for my desired setup. I had two goals in mind. 1. Battery Backup 2. Time of Use energy savings (TOU) The EG...

@eric- results of some testing I did tonight. PV Input Voltage Testing The PV input voltage refers to the DC voltage measured across the inverter's...

Just curious if the 6000XP is working for your application? I have recently set up a similar goal, of "UPS" for my server/network room. I have...

@joel-brodeur thanks

@pawnee Click on the little arrow below eric's badge, then click on the little mail icon. JB

@eric will do as soon as I figure that out. Never sent a PM

After a bit more work with Support, we got it going. The Flexboss was in Off Grid mode so it wouldn't see the Gridboss. Additionally I had a network c...

@zeppelin Are you using a 120V or 240V generator and are you charging the batteries at 70A with the chargeverter?

@zeppelin Have you tried charging the batteries with only the chargeverter, no PV? If so, do you get the same results?