@wiredup Did you hear anything back on this yet? Just curious.

@jared Thanks Jared. I think I know what you are trying to say but not 100% sure. My concern is that they should all be charging and discharging at ...

No changes made by me. I did notice that some new parameters showed up in the monitoring app under settings which is why I thought there might be a fi...

Thank you brother. thats a big help and a step in the right direction! i will link the device as soon as i get back to my home computer. thanks again....

1 - It is my understanding that there is no limit on the output from the generator. The system should only draw what the system can (just make sure t...

Should i post this elswhere? if so can a mod move it or should i repoast?

@eric It is a BA dongle which was purchased in July of 2024. How does this get upgraded so the firmware can be updated to enable a complete set of ...

In order to update your dongle, you would need to have a BJ, BG or BE dongle. You can identify which dongle you have by looking at the first to letter...

Did you make any changes in your settings prior to this issue happening?

@nathanfaught We are actively working on this and will have an update soon to resolve the issue.

@jlankford I switched to Volt with a set high voltage of 59V since the BMS is set for 58.4(3.65 per cell). What happens is when one cell in each of...

@DougL Which charging control method are you using on the 18K? SOC control or Volt control? I have found that when using SOC control the 18K will ...

Were you able to get the firmware update installed?If you have the inverter online, I can update the firmware for you.

Do you have setting #3 set to GNE? Sometimes this does require a firmware update depending on what firmware the inverter is on.

The advanced menu has the option to enable Zero export and disable Grid sell back. The only way to make sure that absolutely nothing feeds back to gri...