This is possible, and once the grid connections are made, the system will automatically detect the phasing. I suggest connecting the Wi-Fi dongle to t...

Please keep the community updated as we're really interested in this topic. Need to ensure zero export means zero.

So, once we need to add that third battery, a busbar will be needed? That makes sense.

@jared 👍

At this point, I am just going to let it run for a couple of days to see how it goes. Today it successfully charged battery in the morning, then char...

I’ve posted recently not to look at SOC and go with battery voltage. Took me a long time to get over SOC. Mine show 0% at 47 volts and EG4 says 20% is...

There are a lot of things that could be made clearer in the manual. I was very frustrated at times. I felt like an idiot but it wasn’t me it was beca...

Here is a graph from yesterday showing how this effects the tracking of data. That sudden big drop in the amps is when the register overflowed and wr...

No problem!! Glad to help! Just remember that the voltage while charging will be higher than the voltage while discharging even though the BMS will ...

SomeJ this is very very useful information and these curves is exactly what I am experiencing 50 to 54 is like bulk of the range 10% to 90% 46 to 50V...

Here is an example of my system today while it is performing the monthly top up / SOC sync. (using Schneider inverters and charge controllers) My ...

The nature of these lithium based batteries do not provide for a very consistent SOC vs voltage curve like with lead acid batteries. I have seen some...

I can't find a way to edit the original post while it is in a pending state, but one solution that EG4 could employ without increasing the register si...