How is it straightened out? Did he already make a wiring change not noted here? He needs at minimum an interlock added as I described above. Preventin...

@eric @mylej @jlankford So, we have figured out the flickering lights and got that straightened out. The AC still does not charge the batterie...

@mylesj You need the electrician to make a change to your wiring. Joel is correct. It should never be possible to have a feedback loop as Joel ha...

This would not fix the problem stated above as it does not provide it on the LCD. So are you stating you can separate them on the LCD where Live data...

Oops, I didn't see he landed AC output from inverter into main panel

@joel-brodeur I'm not aware of any instance of the 6000xp being able to back feed the grid through the AC input.

was recommended to update firmware, currently at 0202 ... gonna try that tomorrow

@mylesj @joel-brodeur I've scanned back through this thread... I don't see any mention of trying to change to voltage control for charging. Have y...

somehow I fixed it. messed with enough stuff and it started displaying now.

@jlankford that was it. Missed flipping s breaker.

I am having this same issue on My 12kpv with one All weather battery. The battery is at version Z02T17, both protocols are EG4, the configuration page...

@joel-brodeur My LL-S batteries are all v2.18. Working fine. What was the cause of the flickering? Did I miss it in this thread? Does he have a l...

@jlankford Good to know Thank you. Update on @mylesj we got the flickering lights figured out. But cannot seem to get the inverter to charge the ba...

@joel-brodeur Yes, if you run the inverter open loop with voltage control, then you could run the Chargeverter with closed loop and SOC setpoints t...

I tested the Smart Life app and proved it to myself that yes it does work just fine. Good To Go! One less app to keep up with! ὠ...