@joel-brodeur 6000xp

@thomacus If the calculations show that it will run on a single MPPT, you can definitely run just one MPPT and then add later on the other MPPT. I ha...

@joel-brodeur The reason I’m asking is because when the summer comes, we’re gonna put the other five panels on the MPPT. two I did the calculations an...

@johnnyg Just as a follow-up, I THINK it is setting 6 JB

Maybe one of the EG4 technical experts can help out on this. I am just not certain which settings are on the screen to increase the Adc charge rates,...

@wvaoffgrid with a two-wire start/stop, you would not need to manually start and stop the generator.

We have no Internet access and the generator is manually started.

@johnnyg There are some settings that will increase the charge limits to the battery. I am not certain if they are available on the screen or the pho...

Do you have to manually start and stop the generator? Or is there a way to have it auto start when the batteries get down to a set point?

Good news, the system is changing! From this picture can you determine how much charge is going to the batteries? Could I increase the charge rate...

One more thing to add. We are building a new house and every time I plug the generator into the 6000XP a ground fault outlet in the house trips. I f...

Keep us posted please. JB

Thanks again. Yes, the fault cleared. The generator is a Champion dual fuel. Running on propane 7200 running watts. The generator was cold as wel...

That is nice. I would give it 2 thumbs up if I could. {emojis}:star-struck: