excellent, thank you. I will makes the changes this afternoon (HST) and then make a post with results

Currently, there is no option to create a guest account for the end-user station at this time.

@scottmr808 I am able to view this station.

@bluetrader222 That is very strange. What firmware version are the Wallmount batteries and Sol Ark?

I am sure the 4/0 work just fine, just do not like how they look once they are crimped. 🙂 I have never cut test a 4/0 but I have the 3/0 and I l kn...

Jared, thank you for the suggestions. I will do the BMS reset and then if that fails try lead acid mode. For the 120v input, I am thinking to just w...

With the launch of the Lifepower4 V2, the models are now quite similar, both offering rapid shutdown capabilities, multiple battery protocols, and 64 ...

What stands out to me is that the BMS is showing an SOC of 0%. I suggest trying a BMS reset by holding the reset button for 10 seconds with the batter...

@pawnee MoData... those charts show no large loads or low battery near the brown out time. since that brownout event, I got permission fro...

@joel-brodeur Yeah, that's what I thought, but you would think they would know the correct lugs to send...

@jared Yes because of the setting I placed. I had the battery discharge to 48V and it seems to go down to 45-46V very fast from 50w drain..... Now wi...

@papote What is the model of the generator? Also, can you show a picture of how the connections are made?