Have you recalibrated the batteries SOC?

@krzysiek_kta it is not great for LFP to hold at 56v, and its hard on the BMS and charge controller to cycle on and off. There needs to be a reasonabl...

I am having the same issue. I have to toggle DST on and off, and change my GMT all around to try and get the time to line up. Any update on this fix?

@eg4eric Off grid mode is Disabled

I have a gridboss that is grid connected and when I turn on the grid breaker to let energy flow the unit won't do actually let anything happen for abo...

@dtbaker61 Got it. Yet it seems when in Off-Grid mode with open loop comms during the day my 6000xp did not maintained 54v float voltage as progr...

@krzysiek_kta I don't want closed loop comms, I want to program voltage setpoints. This is working correctly finally on a 6000xp system that is offgri...

@dtbaker61 Are you positive the issue was resolved?   I had some issues with my EG4 Wall Mount battery BMS comms with 6000xp (finally reso...

I had the same problem with the first 6000xp I installed.... and it was eventually resolved with a firmware update. I would have hoped the same logic ...

@eg4eric 6x Midnite Solar powerflo-5. I do NOT want to use closed loop comm cables, which is why I set parameters as shown in top post to enable the ...

What batteries are you using with your system?

Here is a picture.... voltage is floating at 56 instead of 54 as defined. I consider this to be a BUG, and not happy about it since holding batteries ...