@joel-brodeur The current challenge staring me in the face is our first freeze. Whenever that happens. We only get about two weeks of real winter...

Looks, fantastic. Sounds like cooling is a challenge in your area. For me it is heating. I just haven't found great solution. Yet...

@joel-brodeur future planning and 45 years in IT have taught me to leave plenty of room for "oops that didn't pan out the way I thought it would." ...

I know exactly what you mean. I made some very $$$$ mistakes with my first system, and that was after 3 years of tutelage from someone that had made...

@joel-brodeur Thanks for the info. The way you described was my original train of thought. However; self-doubt tends to creep up when you are spend...

@jared Thanks Jared. This is the one I use. it was recommended by one of the installers/sales techs. I've found it useful, perhaps someone else ...

So I installed the so-called correct version you linked above but now my 6kw panels are apparently outputting 45kW...a neat trick for a firmware updat...

Thanks Jared. But just to clarify: In example 1 where you wrote "AC coupling will not operate." I think you meant "AC charging will not operate". ...

for clarification:

If the wiring is the same as the 6000xp, then the manual is correct. The RSD button, requires a NO contactor. The text with the image is regardi...

The dry contacts for the external RSD are NO on the GND/RSD port.

I will verify this information and update it with the correct details for the RSD relay.

That looks like a mistake in the line diagram. I will be removing this from the post.

AC charge will be automatic once configured.