Sun came out today and charged system to full.... verifying that the charge curve is NOT doing what I programmed. The 6000xp is holding end-of-charge ...

You can find the firmware file at the following link: Allweather Firmware

Thank you. All batteries are version Z02T13 - so they all need upgrading. Where is the file? I was also advised earlier by S2 phone call to set CAN ...

@jared Hi, Thanks for the reply. Are you saying the EG4 won't allow power to flow backward through the load ports? The issue I am facing is that m...

Make sure that the battery firmware is version Z02T17 or newer, with the CAN protocol set to EG4/LUX and the inverter's Lithium brand setting configur...

@joel-brodeur would you mind sending me the SN for the inverter through a DM? I would like to take a look at the data.

@dan_in_ak I currently do not have more information on the testing. However, I will post additional information as soon as it is available to me.

It’s not recommended to connect both inverters to the same panel since they don’t communicate with each other. Instead, consider AC coupling to the 18...

Good to know, I wasn't aware of the EPS side of it. Thanks, JB

12VDC will only be provided to the RSD power contacts when the inverter is powered on with the EPS switch set to the "On" position.