@teeumup There is an Update guide buried in the zip file in the link provided by Jared. There are 2 updates in the zip file an RS232 update and an RS...

Fixed now, but no response from EG4... Issued On Friday, March 28, 2025 at 8:00:00 PM Expires On Sunday, March 29, 2026 at 7:59...

I have more data. I experimented today with turning off the solar disconnect and it instantly solved the problem. The 6000xp had been ramping down the...

@dlwittsr This is the other issue I need to work on. I have 3 batteries, but only one is shown. This happened when I installed the second battery, an...

@dlwittsr OK I will by the RJ45 dongle as I pulled a CAT6 to that location I also noticed that not all of my batteries are the right firmware. Do y...

@jared Can you link me to either a video or documentation on how to upgrade the firmware on the batteries?

Thanks for the reply, Frugal. This is what I meant with option 2 and the extra hardware. I just couldn’t think of Dinrail at the time I was writing ...

Couldn't you mount some din rail on the wall to gain more clearance? Toggle bolted inverter doesn't sound secure to me for long term purposes.

@teeumup I might add - the inverter will report the correct charge capacity (based on number of packs) as amperage - even without showing the details ...

@teeumup Yes - Jared solved this. The Wifi dongle vintage is the issue. Older ones cannot read battery information. Maybe the firmware discussion abov...

@dlwittsr did you ever figure this out. I have 3 powerpros and a 18kv and I have never had any detailed battery info. I just added the 3rd battery an...

@eric I noticed on our recent bill there were a few kWh of grid consumption power and I believe it's from little blips of grid power usage I see on th...

It now works. I am impressed that it was fixed so quickly. {emojis}:grin: Of course, it should not have happened in the first place.