I think the discharge is spread across the batteries regardless, but most of them are simply not measuring it. When you say that one unit discharges...

I recommend verifying that the device address is set to 0 and the battery dip switches are configured to ID 0 before updating the battery. Also, here ...

@jlankford Thanks. So, if I had a higher continuous draw--maybe at least 200 watts or more--the discharge may be more likely to be spread across the b...

@joel-brodeur Next trip to the cabin I should have the gen set up to auto start, so we'll see. I generally keep an eye on it from the online monitor c...

For the 18Kpv the fan logic appears to trigger just based on power flow through the unit, in any permutation... into or out of the battery. Simple gri...

Unsure what happened, but it did connect and is working now

@jared I think you should be able to zoom in on the cabinet and see the dip switch settings. LCD screen and screenshot of EG4 monitoring program ...

@greginmadison GridBoss:UL1741, UL67, UL869A*FCC PART 15, CLASS B (PENDING) FlexBoss:UL1741, SA, SB, PCS CRDCalifornia Rule 21 Phase I, II, IIIArc...

I want to update the Firmware for the v1 LiFepower4 48V 100AH but need help what to do next. attached is a screen shot of the current firmware. I have...

What about auditory behavior of 12kVP vs 12000XP?

(that last comment should read "800W" not 800 kW!) My worst case steady state load is about 700W, for which silence would be a huge plus. The stri...

@jared To clarify on "Left and Middle Fans: Activate when charging or discharging power exceeds 300W", does that mean PV power input also? In other w...

Can you share a picture of your current settings?