@joel-brodeur I'm not using a 6000xp, I have an 18Kpv. And I'm using a very small 120VAC generator through a Chargeverter to recharge batteries in ...

@jlankford You type faster than me. 🙂 I haven't set my Gen charge current to the maximum yet as I have always wondered what will happen if the cab...

@jared I'm facing a similar issue. I've been trying to configure my inverter for Peak Shaving which as I understand it should change the inverter mod...

@brdfrd That's 30amps of AC current, not DC. And since the sustained rate on the gen is 6,300, you should limit to 26 amps AC. But the setting th...

@joel-brodeur That all makes good sense. I have watched that Will Prowse youtube which made me wonder. cc @jared Maybe the EG4 team can provide a ...

@joel-brodeur I'm using a WEN DF875iX. The specs say 6300 watts (running--7800 surge), on propane--generator is connected via a 240v NEMA L14-30R twis...

@brdfrd What size gen are you using? Also, your "Generator Charge Battery Current" is currently set at 30A. This could be what is limiting your cha...

Following. I see similar issues using an 18Kpv and six LL-S batteries in an EG4 rack.

i see my question has an unapproved tag and it is awaiting moderation. the reason i posted here is i have a rather un responsive installation company....

Adding that I have the batteries installed in an EG4 6 bay battery cabinet.

@jared That link was trying to get a charge curve for LFP, not FLA (flooded lead acid) batteries. I needed a charge to a voltage, hold that voltage fo...

The documentation indicates a setting no lower than 20% SOC is recommended. EG4®-Indoor-280Ah-Battery-Specifications-Sheet.pdf My rudimentary opin...

@bobandroslyn Fantastic. Regrettably I am not overly familiar with i-phones. If you could tell me what gen it is I might be able to see what I can...