Hi Jared, Thanks. When this happens my EPS output load is usually only 300 - 400 Watts. Sometimes lower. There are no errors listed in the Event Histo...

Thanks

The first inverter powered on will take the role of "master" inverter. However, if these are paralleled on the monitoring system, I would verify the s...

I would recommend setting the discharge current to 350A with the two Wallmounts paralleled to the three 6000XPs.

Are any errors or warnings being reported when this is happening? My immediate thought would be EPS overload as the one Indoor Wallmount would not mee...

Im sorry it showed up like this. I looks like the QC assiociate was trying point out a physical defect on the battery, and some way, some how it ended...

The generator input can be adjusted using Setting 18 on the LCD display, and GEN boost can be enabled or disabled via Setting 30. Regarding ...

Hard to believe that it came from the factory that way.

Great! Thanks guys!!!!

Good Evening. I can attest that it works like a charm. I have been running "battery only" since June without an issue. I run a well pump on the ...