@joel-brodeur I’ve noticed that too. If the SS guys don’t know what to do you’re just out of luck. I’ve had a couple questions for EG4 and have ema...

What have you figured out? Did you get it working? And running your V1’s in lead acid mode is fine they are just trying to diagnose the problem

I’m not sure about replacing it with a 100 amp breaker but it could always be ran through a separate breaker box that has a 100 amp breaker

Thanks I had missed that setting. I tried it but it didn’t help much. It’s a simple software issue if we could get the attention of the EG4 folks.

@joel-brodeur Thanks

If you want to be more depressed. I had to get 3 before I could get my V1’s updated 😀 first two cords were bad. Just my luck

@jared the V1’s are the newest firmware. The V2’s were bought last month. I’m assuming the latest it I can try loading the BMS test for them and make ...

@jared my Lifepower4 V1’s and V2’s do communicate with the 18k but the SOC on all 6 shows 0% at 47 volts. Is this right? I’m just doing what the Tec g...

Good to know

Yes I had problems because I didn’t know the app had more settings. A good example is I couldn’t get my generator to charge the batteries above 3000 w...

@jared thanks. The Tec guys at Signature solar discouraged me from using SOC so now I’m not sure what to do

@joel-brodeur thanks. I’m going to contact Tec support and double check. I’ll make a post and see what EG4 says. I’d love to she a SOC vs Volts chart ...

Looks great. The 18k is a fantastic inverter