@ron Perhaps, but Signature Solar and EG4 marketed these systems to people with the understanding that a generator would work directly wired to the ge...

@jared I searched EG4's online resources and downloaded a generator page state the minimum generator size was 4kW. Just saying there is an inconsist...

@jlankford I would assume that it knows how many AC amps it's producing to determine the power output. Does it not know how many DC amps are coming in...

@coolrunnings ...can't edit my previous post. I just saw your other post about the Cerbo... So without a BMS input, I'm curious how the 18K deter...

@coolrunnings Cool. I would trust everything you listed except the EG4 screen. My system, consisting of one 18Kpv and six LL-S rack units, can cons...

@jlankford Measuring the battery current with an ammeter with no PV on, as well as a shunt for the Victron Cerbo GX. Plus the EG4 screen shows 0 watts...

@jwmarshall Are you saying that Signature Solar is replacing ten 18Kpv units because of a parallel phase error that only started after a firmware u...

@coolrunnings Thanks for sharing the solution here. Keep in mind the batteries won't register any current unless it is above some shunt measureme...

I made a separate post about how I solved this, but it is apparently stuck in moderation hell, so maybe I can get the word out here. This problem seem...

New to group/EG4...Installed 6000XP,nice setup,the usual non clarity of simple instructions to start and program.I'm 70 and not into apps,etc.I use my...

It discharges from 100 to 99, then it charges the batteries from 99 to 100(SOC). This is the cycle that its stuck in.

I have 2 strings of 6 (535W) panels each. Each string provides about 3kW at about 240-250V and are connected to PV1 and PV2. The panels, which are a...