@lyrawinslowLooking through the settings I'm not seeing anything such as "Grid Export Limit" or "Battery SOC Threshold".The closest thing to Grid Expo...

I send the following series of HEX characters to the battery: 40 03 00 00 00 27 0A C1 And I get the following response: 40 03 4E 15 00 ...

@eric Well I suppose that's a useful tip in some cases. The solution was one not listed anywhere. 1. In the EG4 Monitor app, log out. 2. Connec...

Make sure that you have a specific network for 2.4GHz and don't have any special characters in the Wi-Fi password.

That should be correct for the 12kPV. You shouldn't have any issues. However, If you run into any issues with the inverter, feel free to reach out. We...

Hello @tlane17, exactly what you need help with? I’ll do my best to assist you!

@jared unfortunatley it is still defaulting back to YES for Daylight Savings. would be great if this were fixed but i give up for now. i cant risk t...

You can do either option, but have to size the wire correctly. I would keep the batteries close to the inverter./p>

@jared I understand it takes time. I just went back in tonight and daylight savings is set to YES yet again. This has been the problem since Februar...

@george redingerTo fix this, turn on "Self-Consumption Mode" or "Battery Priority" in your settings. This ensures your solar power charges the battery...

Regarding its lights, all it does is blink the WiFi symbol — nothing else. Also, pressing and holding the bottom at bottom for 10+ seconds does no...

I can connect to the WiFi of the dongle, but 10.10.10.1 does not respond in a web browser. However, I can ping 10.10.10.1 just fine, so clearly I am...