Yes, charging by voltage in lead acid mode would be the best approach. I’ve attached a document that explains how to properly top balance the batterie...

@joel-brodeur I believe this is normal. Since the battery is already at 100%, it likely wouldn’t be considered charging. Instead, it’s more of a maint...

For your battery bank, are you using a BMS?

@joel-brodeur -- I found I could reproduce the problem by using a toaster and a hot water kettle at the same time. Enough to cause a voltage sag, but ...

That makes sense, any idea how long you "high load" would be occurring if it wasn't going into bypass? The reason I ask is my old system had a preven...

I think I've figured it out! I was able to take a slow-mo video of the screen while reproducing the problem. What's happening: A high load on the inve...

@sjvicker is all you need for the BMS is a laptop and a cord to connect to the battery. You can download the BMS test off of the EG4 website assuming ...

Yes, that is an interesting question. I've never heard of any benefit of deep discharging. My normal practice is never below 20% and monthly top balan...

Hello Eric First pic is the overview screen on the local monitor app Second is the local set screen under the discharge setting exspanded th...

After thinking about this for a while I wonder if the folks at EG4 might be willing to write up some TSB's regarding this subject? Maybe they could ...

@dannybeardsley On the 6000xp inverter screen - setting 22 - submenus AREC and EREC. Appears that it holds the last 20 events. Not exactly certain h...

Woah... I didn't know that was a thing. How do I access the "inverter logs" if not via the website?

I still haven't gotten around to any kind of Wifi connectivity on my inverters or connecting to my batteries. It's working so it keeps getting pushed ...

@nctarheel1980 @jared for sure is going to fix this remotely

I might be having the same issue? In doing an initial set up, I can't get past the message "Connect dongle of device failed" on the app. I can see the...