The input for Chargeverter only allows for VAC.

Thanks again JB. Two days later the EG4 site began showing data from Tigo on the solar panels. The EG4 view is close to tracking the 1-minute Tigo sit...

With the discharge curve of the battery, the voltage range from 52V to 50V typically corresponds to an 80% to 20% state of SOC. However, since voltage...

I am not familiar with the Victron systems. However, I am aware that with the EG$ inverters you can set the "charge to" and the "start to charge" lev...

Good point on the UL ratings, I believe CA has crazy requirements if the total BESS (enclosure + batteries) is not UL9540 certified, and in this case ...

Finished the equipment install. Now going to start experimenting with the smart load settings for controlling my two car chargers. One Tesla charger o...

This is the most recent, the oddity was that the voltage did not change.

I have a 6-bay rack and I'm impressed with the build quality, bus bars and equipment ground connections, etc. I'm glad I bought the thing to house my ...

@ron My understanding is: Data history is the data that is streamed to web monitor. In case your inverter loses connectivity to the web, it starts wr...

What is the difference between "local Data" and "Data History"?

I will need to consult with our R&D team for this. Once I have the information, I’ll share it in the thread.

This would be correct. However, feel free to use the string size calculator shared by Joel.