@ray Like a lot of folks, you might have just done yourself a favor! Since you will most likely be required to purchase a replacement dongle, plea...

@montufar I had a similar situation with my 24K. The solution I finally settled on was to run the 24k directly from the my 6000xp; it has no probl...

@dougl I hear ya! I have been downloading some of the monthly data and re-uploading it to a NewRelic metrics & observability account i maintai...

I'm glad I found this! I know exactly how you feel and where you are headed. I went through the same song and dance in Parker county. I am now...

@rasolar Agreed!

@rasolar Yep! That it does!! {emojis}:grin:

Good Afternoon. Just a quick question from the curious, as I too am beginning to plan my "next phase". Why did you choose the GridBOSS over the...

@lyrawinslow Sounds like a pretty cool setup, do you have any photos you can share?

@fkitzmann & @montufar You are both correct! A second battery was required! You will find the results of adding that battery here ==>/p> ...

Good Morning @dougl I totally agree that you would get far better results. However adding that single variable complicates the behind the curtain ...

@dougl I believe they are using the forecasted cloud cover in a "sunshine" formula (i have not a clue). If they already know the forecasted temp a ...

from the 6000xp users manual. Bottom of page-1 right after TOC.

@coryell-offgrid Don't forget to count the idle consumption of each of the inverters. Three inverters is only going to hurt a little bit, I think i...

@bradflylesgmail-com Marginal at best. But you do the best you can. You have eliminated one avenue of access, no sense leaving the front door unl...

Today is baptism day! I continue to be blown away by this EG4 24K Mini-Split. The temps here in the DFW area are to reach the 100's for the f...