@jared , the issue was not temperature related. The "solar enclosure" was well above 32F. The issue is that 2 of 3 Lifepower4 batteries failed to rest...

@jarrett , it's been more than a month now.... and no work back from EG4 on a firmware patch to address this bug in charge curve ?! I am not impressed...

@jared, I updated firmware to ccaa-190D0E, and have been able to get the system going. However, I am not seeing a correct CC-CV charge curve for LFP u...

system reverted to "bad behavior" for some reason.... floating at charge voltage ?! really, really, really NOT what I want. When can we expect to see ...

@nolensb , wow, that's a big miss on mfg QC ! but, not same problem in my case.....

@jared , I will drive up later today.... it's about an hour into the woods...

ping

no response from eg4 on this since posted on the 12th ? I am also seeing NO VOLTAGE on a brand new 6000xp at the load breaker for L1-n or L2-n... bu...

I have (finally) been able to approximate a LFP friendly charge curve with the 6000xp charge controller running the show 'open-loop' (without rj485 co...

I have FINALLY found a combination of charge voltage setpoints that appear to give a "correct" CC-CV charge curve for LFP. I think EG4 still needs to ...

Sun came out today and charged system to full.... verifying that the charge curve is NOT doing what I programmed. The 6000xp is holding end-of-charge ...

I have snow showers happening today and for the next 2 days, and may or may not get a full charge by the end of the day.... I'll capture and post the ...

11/5/24 - I've tried a few different settings, and may have stumbled on something that works, which (weirdly) may depend on the ORDER that charge volt...