@eric Thanks for the response. I do not know the modes used at set up , that is the problem , it was done by a technicial that know little about this ...

@joel-brodeur There is a changelog for the RS232 update, but not for the RS485. You can update both, but you will not see the RS232 update unless you ...

Does your server rack battery have different protocols you can set? If so, you can try to set to one of the following in the image. Also, what do you ...

@eric perhaps I was not sufficiently clear. Let me try to be a little more verbose: * GridBOSS has inputs and outputs. * Inputs are: grid, inv...

@eg4c Are you connected to the grid?Providing an explanation for these numbers is challenging due to the lack of sufficient data or information.

Yes, as of now it is only through windows that you can update the firmware for the battery. You should be able to log in on another device with the sa...

@eric - one eg4 allweather battery; 1 smart port. With that said, the data is from GridBOSS, it has no batteries hooked up to it.

Tariffs cause short-term pain, but long-term effects are uncertain still.

@Eric Yes, backup loads breaker is/was on. I'm not sure if you saw my most recent post. Power is being supplied to the backup loads on both grid and...

@eric Here is a pic of what my battery currently indicates for firmware/LCD version Do I need to update both the firmware and the LCD? If so, cou...

There are 2 firmware updates for the indoor WallMount batteries. RS485=Z02T04 and RS232=S02T11. You will need both RS485 and RS232 cables for these up...

I don't know much about this battery, but what do you have the charge current set to on the inverter?Do you have the inverter on lead acid mode?