@nathanfaught We are actively working on this and will have an update soon to resolve the issue.

@jlankford I switched to Volt with a set high voltage of 59V since the BMS is set for 58.4(3.65 per cell). What happens is when one cell in each of...

@DougL Which charging control method are you using on the 18K? SOC control or Volt control? I have found that when using SOC control the 18K will ...

Were you able to get the firmware update installed?If you have the inverter online, I can update the firmware for you.

Do you have setting #3 set to GNE? Sometimes this does require a firmware update depending on what firmware the inverter is on.

The advanced menu has the option to enable Zero export and disable Grid sell back. The only way to make sure that absolutely nothing feeds back to gri...

Not sure what happened exactly, but once you set the Discharge cut off the inverter should stop discharging the batteries. It could be that one of the...

Please send me a PM with your inverter's serial number, I would like to look further into this for you.

@jared Also interested in this as my battery is also Z02T03 showing V2.03 on the monitoring website.

They are on the input to the grid breaker before the 18KPV. I originally had them inside the 18KPV box but was told that can sometimes be noisy so I m...

Where are the CT's located?I would recommend making sure they are connected and placed properly. It could be using the grid but there could be somethi...

ANOTHER UPDATE: Spoke with (Javier) the supplier who we purchased from (Signature Solar). He had me run some tests. Ironically now the Bluetoot...

@Eric thanks! Setting 15, AC Input Load Timer Settings should be set to off, (00:00 - 00:00) ? What is the purpose of this setting anyway?

Since the 6000XP is an Off-Grid inverter, it will prioritize solar and battery before using the grid. It will use solar to power the loads and to char...