Awesome! Yes, definitely let me know if you need anything else!

Possibly, and I will definitely pass this idea along to the team!

Can you please send me a DM with your name, number, and address, and we’ll ship you a replacement dongle.

Hold the reset button located under the dongle for about 3-5 seconds. Make sure you are connecting to a 2.4GHz band. Make sure you follow the instruct...

@coolcat I've attached a document for the Flexboss and Indoor WallMount battery. Let me know if this isn't what you are looking for. EG4-FlexBOSS21-28...

For user-defined, it really depends on your battery's recommended configurations. Normally for EG4 batteries, the settings would be: #26 (Bulk char...

@eg4c I would need to review additional data, as it's difficult to analyze based on a single recorded instance from the inverter.

@jp86gt There is not one for the WallMount batteries. If you need assistance with the firmware updating process, I'd be more than happy to help.

@whiskyneat305 The inverter's MPPTs are engineered solely for solar applications and are not compatible with wind energy. Under no circumstances shoul...

@haitises Unfortunately, we are currently unable to send out the BMS, as our compliance and legal team is still working on the necessary documentation...

I'm glad you were able to get it to work! Let me know if you run into other issues.

A wind turbine cannot be connected directly to the inverter. You can use a wind turbine to charge the batteries, but this requires a separate charge c...

Try logging out of his phone, logging into your device first, and then logging back into his. We've tested this multiple times, and it does allow the ...

Do you know if the inverter is reading 100Ah?If so, you can check setting #6 (Charging amperage) and make sure that it is set to between 50A-100A (20A...

@joel-brodeur There is a changelog for the RS232 update, but not for the RS485. You can update both, but you will not see the RS232 update unless you ...