It did it again today but I couldn't leave it that way and miss another day of charging. It seems like in Off Grid Mode, once the battery gets down to...

So it finally switched over to EPS on its own at 1:01pm then back off and back on again at 1:09pm when if finally stayed on and started charging the b...

So this morning it appears to be doing it again. When the loads turned on, solar immediately jumped 2500watts to meet the load but had not been using ...

@dtbaker61 I can't agree more with you. Whenever the system is marketed as Off-grid it should have to be manageable (upgrades, serviced and so on...

@krzysiek_kta The issue with planning for UPS for the wifi is problematic whether the install is grid-tied, or off-grid, since normal functionality de...

@dtbaker61 Well, As hobbyist BETA tester I always build backup plan. I do have externals bypass transfer switch separating Inverter from the hou...

@krzysiek_kta aha.... see.... what if the customer doesn't have a separate UPS for their wifi ? don't you have to turn off EPS to inverter in standb...

@dtbaker61   I have 6000xp with Gen boost enabled and 110v/220v 32A split phase step up transformer connected to Gen ports. Basically it is ...

@ianscott also do this on a Google search.... 'are the smart plugs on the eg4 gridboss bidirectional'. You may to be able to somehow hook in thru thos...

@ianscott I'm gonna look for some victron Autotransformer competitors also. If I find something like it for less money I'll report back.

@dtbaker61 I don't know if hitting " Start Quick Charge" will run the generator or not when off-grid.?. Does anyone know how that works?

@mccorb the autotransformer looks like a great idea as long as (like you pointed out) the AC source is clean enough; I'll still need to use the Charge...

@ianscott what did you think of my Victron Autotransformer idea? Did you look at the specs? It's a little less expensive than a chargeverter. It's sup...

@dtbaker61 I have two 600VA UPS units - one powering the wi-fi and the other internet gateway. All firmware updates I have done were in off-gr...

@dtbaker61 I’d just check your gen charge amps to make sure they aren’t set to high for your generator. Remember they are in DC amps!! I don’t see why...