EG4 Community Forum

Anonymous
Joined: September 14, 2025 12:05 am
Topics: 2 / Replies: 14
Reply
RE: 6000xp Balancing issue--how to correct?

@brdfrd OK, that's what I was expecting. My system sits in EPS standby and consumes about 1.8 kW per day from the battery. With that low current ...

9 months ago
Forum
Reply
RE: 6000xp Balancing issue--how to correct?

@brdfrd Here is my experience with Auto Gen start: The gen appears to start when the inverter shows below the set SOC Start, not when a battery hits...

9 months ago
Forum
Reply
RE: 6000xp Balancing issue--how to correct?

@jlankford adding this: average continuous current discharge is 45-60 watts.

9 months ago
Forum
Reply
RE: 6000xp Balancing issue--how to correct?

@jlankford Well, right now, it's 1.3-1.5kWh--just running wireless internet and security cameras. That's all I dare run at the moment. Solar produc...

9 months ago
Forum
Reply
RE: 6000xp Balancing issue--how to correct?

@brdfrd What do you think your typical power consumption is at your cabin? How many kWh per day are consumed and what would an average discharge cu...

9 months ago
Forum
Reply
RE: 6000xp Balancing issue--how to correct?

@jared Okay, Jared--I charged them up with the generator, in lead acid mode, twice last weekend--and added a fifth battery, as number 5 in the battery...

9 months ago
Forum
Reply
RE: EG4 wifi dongle unable to connect

I've got this exact issue too. I reached out to Signature Solar who are working on it.Also, I find it interesting that the Address and Port fields see...

9 months ago
Topic
Replies: 12
Views: 2018
Reply
RE: Interview with EG4: Talking All About the GridBOSS & FlexBOSS21

UL listed and local or national electric code requirements? I'm looking to install this in a new house build and wondering if this is UL listed (I...

9 months ago
Forum
Reply
RE: 6000xp switching from battery to grid and then back to battery until it shuts down all loads.

Update. Currently my work around on the first post is working fine. For some more clarification, I'm on the newest firmware which allows me to ru...

9 months ago
Forum
Reply
RE: Auditory behavior idle and under load: decibels and noise

@jlankford Ouch. Good point about not making assumptions about different units. Thanks, I will look into the 18K / 6K thing.

9 months ago
Forum
Reply
RE: Auditory behavior idle and under load: decibels and noise

You may want to watch the Will Prowse videos reviewing the 18Kpv. I think I recall him commenting about being surprised by how quiet the 18K is specif...

9 months ago
Forum
Reply
RE: Auditory behavior idle and under load: decibels and noise

BTW, I picked up eight (8) California Solar 540W bifacial panels today for just $175 each. That's 4 kW of panels for $1400. That should do a very ...

9 months ago
Forum
Reply
RE: Auditory behavior idle and under load: decibels and noise

Thank you very much! Fantastic to have little or no sound. Maybe when it gets to be hot days it will ramp up some, but it sounds like it is as good...

9 months ago
Forum
Topic
Page 193 / 269