@jared So utilizing the RS485 communication for the Chargeverter gives a false reading? Even after changing to EG4?

@joel-brodeur That document is correct.

@jared Is that the correct document for updating? Thanks, JB

@joel-brodeur the RS232 cable would definitely be needed. The Indoor does not currently have a firmware update for the RS485.

@jared For reference this is the documentation we were using to perform the firmware update. Thanks, JB

@jared It is the indoor battery

Is this the Indoor or the Allweather battery? Also, both the RS485 and the RS232 cable would be needed for a firmware update.

From your description, the inverter is throwing an internal communication fault. Feel free to send me a DM of the serial number for the inverter and I...

Thanks Jared. Well, that is what I did. I assume this will eventually be implemented, otherwise there is no reason to even ask if DST should be en...

@papote EG4 protocol is currently the only supported option on the Chargeverter GC.

Do you have a scene created on the Solar Aircon app?

Currently, a manual adjustment is required to switch from Daylight Saving Time to Standard Time. This can be done by navigating to the Configuration t...