Could you post a picture of the paralleling cables and dip switch configurations for both the GridBOSS and FlexBOSS?

Setting 43 would be the correct setting to initiate charging with the 3000EHV. However, as mentioned, the maximum initiation threshold is 50%.

Would you be able to DM me the serial number for the Wi-Fi dongle? I can take a look at this as well.

@brdfrd OK, that's what I was expecting. My system sits in EPS standby and consumes about 1.8 kW per day from the battery. With that low current ...

@brdfrd Here is my experience with Auto Gen start: The gen appears to start when the inverter shows below the set SOC Start, not when a battery hits...

@jlankford adding this: average continuous current discharge is 45-60 watts.

@jlankford Well, right now, it's 1.3-1.5kWh--just running wireless internet and security cameras. That's all I dare run at the moment. Solar produc...

@brdfrd What do you think your typical power consumption is at your cabin? How many kWh per day are consumed and what would an average discharge cu...

@jared Okay, Jared--I charged them up with the generator, in lead acid mode, twice last weekend--and added a fifth battery, as number 5 in the battery...

I've got this exact issue too. I reached out to Signature Solar who are working on it.Also, I find it interesting that the Address and Port fields see...

UL listed and local or national electric code requirements? I'm looking to install this in a new house build and wondering if this is UL listed (I...

Update. Currently my work around on the first post is working fine. For some more clarification, I'm on the newest firmware which allows me to ru...

@jlankford Ouch. Good point about not making assumptions about different units. Thanks, I will look into the 18K / 6K thing.

You may want to watch the Will Prowse videos reviewing the 18Kpv. I think I recall him commenting about being surprised by how quiet the 18K is specif...