@britton-beckham you are describing what all of us are experiencing. Can’t imagine this function was ever tested prior to shipping on an off-grid syst...

I want to add my voice to this issue. It's clear that this is a software/firmware issue. I just had a 12 kpv Installed in the last 10 days. My home is...

Hello Eric, The inverter is setup for 250 discharge, but this is not changing the BMS on the battery to 250 amp discharge. These are MNPowerflo 5 ...

I didn't have the inverter dip switches up. Shut everything down, made that change, and I also only had one ethernet cable from the left most porton g...

It looks like it's already in parallel. So we need to figure out why it's not showing the correct information. Were you able to change the DIP sw...

I don't see it on that page: Thank you!

You can change the Discharge Current Limit to 250A. This will allow the inverter to discharge 12kW from the battery.

You can go to the Overview tab on the website, where you should see a button that says parallel. If you don’t see this option, just let me know and ...

Hi Eric, Thank you for the lead. I just sent over an email. I'll report back here any updates.

The reason it’s not stopping the discharge is that the system is configured to use the battery before the grid. To change this, you can enable- Batter...

@joel-brodeur Hey, I know this post was a while ago, what app is that? the stock one, Solar Aircon, doesn't really say much. I got my solar mini spl...

@diver-dave EG4 batteries are capable of communicating with other inverters, which is probably why that question was asked. I don’t recall the specifi...

Hello Eric, The first 2 screen shots show the Forced Discharge being contained be the AC Charge times. The second 2 screen shots show that Forced ...

I would not connect them in series for a 48v system, I would look for an inverter that can work as 24VDC, either single phase or split phase, whiche...