This is correct and another station will not be needed. All information will be accessible through the local connection per inverter.Not at this time.

Would you be able to export the settings and post in thread?

You are able to local connect to the 6000XP without an internet connection with the Wi-Fi dongle included. With this, you can use the Wi-Fi emitted fr...

Our off-grid inverters, like the 6000XP, can charge batteries from the grid and even bypass AC power directly to loads. The key advantage of using a h...

I would recommend the installation of an external bus for future expansion. However, this approach would also work.

Enabling Battery Backup mode configures the inverter to prioritize output as PV > AC > Battery. This setting ensures that battery power is only ...

The generator input for the 18kPV requires 120/240VAC. For more details on the generator requirements, please refer to page 22 of the 18kPV manual.

The Lifepower4 V2 battery is compatible with the 6500EX inverter. However, if the battery does not come with firmware version Z02T04, a firmware updat...

@the-goldendoodle-plantaion To run PV and AC power loads simultaneously, you would need to use the GEN port for AC coupling or generator power. Howev...

Hi Travis, I would recommend updating your Lifepower4 V2 to the latest firmware. This information can be found here:/p>