Update: Firmware version 1E1E is necessary to support LCD v18 for the 18kPV and 12kPV models.

This will integrate with the EG4 app, enabling the following notifications to be displayed on Android version 1.2.7 and iOS version 1.1.3 or later. No...

@caesarv This LCD update was released more quickly than usual to address the original v18 issue. I will make sure this bug is reported to our team for...

The dry contacts for the external RSD are NO on the GND/RSD port.

I will verify this information and update it with the correct details for the RSD relay.

That looks like a mistake in the line diagram. I will be removing this from the post.

AC charge will be automatic once configured.

Typically, a 4-6 AWG wire in conduit is used for the ground conductor. However, I strongly recommend confirming with a licensed electrician in your ar...

Currently, no specific diagrams are available. However, the 6000XP System Wiring Diagrams can be used as a reference, but you’ll need to size the brea...

Also, if frequency shifting is needed, I would recommend having the AC couple start SOC set in the range of 95-99% with the ending SOC set to 100%.

The System Charge SOC limit refers to the maximum allowable state of charge for the system. The Start and Stop AC Charge SOC settings define when the ...

Unfortunately, Lifepower4 V1 batteries are not compatible with Wallmount batteries for communication. However, you can still connect them in parallel....