EG4 Community Forum

Anonymous
Joined: November 21, 2026 9:00 am
Topics: 7 / Replies: 19
Reply
RE: AC Coupled but why does it show Gen Power at night

@douglI don't remember if that is normal since you have AC coupled attached to the inverter, but I will look into this. do you have Micro inverters or...

3 weeks ago
Forum
Reply
RE: Soft Bricked BMS-Lead Acid Mode Only

@bbqsolarYou can follow the steps in the manual on page 34 and 35. I have the manual attached down below. ↓↓↓↓↓↓↓ EG4-WallMount-All-Weather-Battery-...

3 weeks ago
Forum
Reply
RE: Wifi Dongle Registering Error

@shawnmcI was able to create a station for you and successfully add the dongle to it. The only remaining step is to set up your end-user account. I’ll...

3 weeks ago
Reply
RE: 6000xp dongle previously registered

Of course! No Problem! if you have any other issues, please let me know!

3 weeks ago
Reply
RE: rescued from bad update

@bbqsolarI believe I answer your other post from the 24th, but make sure you have the Protocol on the battery set to CAN: EG4/LUX and the protocol on ...

4 weeks ago
Reply
RE: Soft Bricked BMS-Lead Acid Mode Only

@bbqsolarMake sure you have the Protocol on the battery set to CAN: EG4/LUX and the protocol on the inverter set to Lithium Brand/Type: 1

4 weeks ago
Forum
Reply
RE: eg4 12000xp and 2-314ah wall mount battery chrging issue?

@67chevelleIt looks like the Charge limit changed. However, like you mentioned, we will wait until the PV kicks in.

4 weeks ago
Forum
Reply
RE: eg4 12000xp and 2-314ah wall mount battery chrging issue?

Thanks Eric, I really appreciate the help. I don't have enough pv hitting the panels until roughly 10:45am MST to see if they'll charge above the 31 a...

4 weeks ago
Forum
Reply
RE: eg4 12000xp and 2-314ah wall mount battery chrging issue?

@67chevelleI was able to update the inverter's firmware successfully and it looks like the batteries were able to update successfully as well. However...

4 weeks ago
Forum
Page 5 / 437