@jimijo I don't have direct familiarity with SolarEdge inverters. However, if the unit is a 48V system, it's likely that it will work but there will n...

Hi - it's not every day, but has happened a couple of times now in a few months. I will set my cut-off SOCs lower (to 10%) to see if that will trigge...

Are you still experiencing those warning codes every day?If so, we recommend reaching out to your distributor for a replacement. This issue has been i...

I am looking to add eg4 PowerPro batteries to a SolarEdge inverter. Will it work?

@tomt Yes, you’ll need to disable AC Coupled. The inverter isn’t designed to switch between AC Coupling and a generator, so this transition may not be...

@notmyday Can you please send me a direct message with the following information: First and Last Name Email Phone Number Shipping Address

@woody350 Glad to hear! If you run into any other issues, please let me know!

@kwindrem The Smart ports will not receive current when using the generator unless the ports are configured for operation.

@eg4eric I have a similar situation where I'd like to connnect my existing solar array via AC. I'd also like to have the option to use a generator...

I second that. It would be great to have and be able to toggle on and off. Not sure where you would get accurate data to work well though.

I read they recommend 3/0 wire size, but that's rated for 200 amps. I went with 1/0 for 150 amps but even 1 gauge is 130 amps. You don't need more...

I turned the EPS switch on, the update went through but is still not showing the new version? does it take time to update once it says it is updated?